Plasma Cutter Pilot Arc, BTC500DP 7th Generation With [Air Sensor Technology] 50

Description: [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life[Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems[Air Sensor Technology]: The air sensor built into the machine displays the air pressure on the front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). An air filter is installed at the back of the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 70 PSI, with a flow rate of 250 liters per minute[Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI[PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables

Price: 229.08 USD

Location: El Paso, Texas

End Time: 2025-01-05T07:33:21.000Z

Shipping Cost: N/A USD

Product Images

Item Specifics

All returns accepted: ReturnsNotAccepted

Return policy details:

Brand: bestarc

MPN: NOT APPLICABLE